Non-etch, mild alkaline, silicate free – non-polished alloys

Powder, mild alkaline, immersion, free of silicates, contains borates. Designed for removal of soils/oils from non-polished aluminium surfaces.

Features & Benefits  

  • Good use prior to anodizing and conversion coating processes
  • Caustic & silicate free formulation
  • Highly effective biologically degradable and environmentally friendly blend of surfactants for cleaning all alloys of aluminium.

This process belongs to ALUMAL CLEAN Series

COVENTYA ALUMAL cleaners and surface preparation technologies are available in both liquid and powder products designed for removal of a range of contaminants from cast and wrought alloys including water soluble lubricants, and other types of oils and buffing or polishing pastes.

They are designed to remove contaminants and soils from machined and non-machined aluminium surfaces and are easily rinsed from part or component surfaces. The product range is designed and specifically formulated chemical blends consisting of salts, surface active wetting agents to provide detergency, and in some formulations, sequestrant (mild chelating) agents which are utilized to help stop formation of scales on tanks and equipment to provide long life and extended performance from the cleaner. Many uses are applied by immersion processing, but also formulations are available for spray processing. ALUMAL Cleaners are available as non-etch, mild-etch, and etch formulations both from acid and alkaline chemistries.  These options offer a wide range of operation on all types of aluminium alloys.

 

  • The Non-Etch Cleaners were designed for the removal of surface soils before any etching process. This approach will maintain aluminium surface finish integrity so the actual etching process is more efficient and provides uniform surface aspect.
  • The Etch-Cleaners are perfect for cases when installation of a separate non-etch cleaner followed by an etch tank is not possible due to space limitations. Etch cleaners are formulated to carry out both processes depending on the application. Etch cleaning always requires proper surface desmutting to remove alloy smuts that result from etching process.
expand
close
Print this page
Share this:
How can we help you?
How can we help you?
If you have any questions, please do not hesitate to contact us.

In accordance with the European GDPR regulation, to the confidentiality charter and to the protection of personal data, COVENTYA undertakes to collect, in connection with recruitment, only adequate, relevant and strictly necessary data to assess that the candidate has the ability to perform in the proposed job. The Human Resources department will keep your data for the duration of the recruitment and without any particular mention on your part, until 2 years after its reception. For any request concerning your personal data, please contact the Human Resources department of Coventya or DPO@coventya.com