Acid Etching for Aluminium & Alloys Prior to Chemical Conversion Coating or Plating Processes

Liquid, immersion or spray applications is a blend of acids for use in the etching/deoxidizing alloys of aluminium prior to application of conversion coating or anodizing processing. Works synergistically with ALUMAL DEOX 425 to improve removal of surface smuts, which is defined by Qualicoat requirements.

Features & Benefits

  • Works very well on all alloys but especially those containing high magnesium and silicon.
  • One component liquid for ease of make up and replenishment
  • Immersion or spray (cascade) application.
  • No Nitrates or Phosphates
  • Removes oxide layers often obtained after prolonged exposures of metal to humid environments with minimal grain boundary attack on most aluminium alloys.

Este proceso pertenece aALUMAL DEOX series

Aluminium has a natural protective oxide surface film and affinity for oxygen, in order to improve the appearance of an aluminium part or component through conversion coating, painting, anodizing or plating processes, requires some additional surface treatment processing to remove the natural oxide layer.

Once aluminium and alloys are exposed to etching solutions, the oxides are often removed but then depending on the alloy of aluminium, there are surface adherent non-reactive reaction products referred to as “smuts” on their surfaces. Desmut formulations are required to remove these from the surfaces of aluminium parts or components.  The types of smuts present are related to the alloy of aluminium. For example, 200 series wrought aluminium have resulting copper smuts that are effectively removed by iron based desmut formulations. Alloys containing silicon or magnesium smuts are thoroughly desmutted with blends of acids including fluorides, nitrates & sulphates. All surface smuts must be removed for success with applications of conversion coatings, painting, anodizing or plating aluminium and alloys.

Choices for Anodizing applications include ALUMAL DEOX 411, 436 or 444.
For chemical conversion coating prior to painting, review ALUMAL DEOX 411, 425, 445, or 427.

Coventya offers many additional types of ALUMAL products to effectively deoxidize and desmut all types of cast and wrought alloys of Aluminium.  This is just a partial list of what is available; contact your local COVENTYA representative for review of other available technologies.


Realizar una consulta

Desafortunadamente, algo salió mal!

Disculpe las molestias.
Inténtelo de nuevo

Gracias por su consulta.

Responderemos en breve
Enviar otro mensaje
* - campos requeridos
Imprimir esta página
Comparte esto:
¿Cómo podemos ayudarle?
¿Cómo podemos ayudarle?
Si tiene alguna pregunta, por favor no dude en ponerse en contacto con nosotros.